 Last additions |
213-25301 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-24263 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-23269 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-22329 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-21325 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-20720 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-19437 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-17352 viewsWeipa, Lorim Point workshops, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like you see on the GT26C models of WAGR L or VR C classes.Oct 26, 2014
|
|
213-18311 viewsWeipa, Lorim Point workshops, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like you see on the GT26C models of WAGR L or VR C classes.Oct 26, 2014
|
|
213-15376 viewsWeipa, Lorim Point workshops building, looking south east at the rear of the building. Canron Rail Group Mk I switch tamper. Canron was taken over by Harsco in 1990-91.Oct 26, 2014
|
|
213-16334 viewsWeipa, Lorim Point workshops building, looking south east at the rear of the building and yard. From the left, R 1003, waggons, R 1001 and the Canron Rail Group Mk I switch tamper.Oct 26, 2014
|
|
213-13319 viewsWeipa, Lorim Point workshops looking east, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. This unit is almost identical to the GT26C models of the WAGR L class. September 1995.Oct 26, 2014
|
|
213-14298 viewsWeipa, Lorim Point workshops looking east, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. This unit is almost identical to the GT26C models of the WAGR L class. September 1995.Oct 26, 2014
|
|
213-11372 viewsWeipa, Lorim Point workshops yard, ground throw point or switch operating unit with the number 5 identification.Oct 26, 2014
|
|
213-12326 viewsWeipa, Lorim Point workshops, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. This unit is almost identical to the GT26C models of the WAGR L class. September 1995.Oct 26, 2014
|
|
213-09588 viewsWeipa, Lorim Point, side view of an HMAS type ore waggon 102, one of thirty such waggons built by Industrial Engineering in Qld in 1978 these bottom discharge hoppers are constructed from aluminium.Oct 26, 2014
|
|
213-10575 viewsWeipa, Lorim Point, side view of an HMAS type ore waggon 19, one of the original sixty one waggons built by Comeng Qld in 1971-72 these bottom discharge hoppers are constructed from aluminium.Oct 26, 2014
|
|
213-08422 viewsWeipa, Lorim Point, view of the handbrake end of an HMAS type ore waggon one of thirty such waggons built by Industrial Engineering in Qld in 1978 in aluminium, the red triangle is the end of train device.Oct 26, 2014
|
|
213-07387 viewsWeipa, Lorim Point, view looking east from the workshops towards the dump station with a rake of waggons lined up with the two types of aluminium bottom discharge hoppers discernible by the hungry boards fitted to the original type waggons, the control cabin for the dump station can be made out in the distance.Oct 26, 2014
|
|
213-05448 viewsWeipa, Lorim Point fuel point looking south across the apron, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like you see on the GT26C models of WAGR L or VR C classes. September 1995.Oct 26, 2014
|
|
| 16589 files on 830 page(s) |
 |
|
|
|
|
|
|
|
644 | |
|
|
|
|
|
|
|
Login
