 Most viewed |
161109 1972416 viewsThevenard, train 4DD4 rumbles across Bergmann Drive with second unit Genesee & Wyoming locomotive Clyde Engineering EMD model JL22C unit 1603 serial 71-730, 1603 was originally built as a member of the NJ class NJ 3 and after starting life on the Central Australia line was transferred to the Eyre Peninsula in 1981.
|
|
161111 2489416 viewsBinduli, Kalgoorlie Freighter train 5025, container flat waggon AQWY 31032, built by Centrecon Ltd WA in 1981 in a batch of thirty five WFA type container waggons, another eighteen were also built by Westrail, to WFAP in 1989, loaded here with three 20' Westrail roll top COR type containers COR 5874, COR 5548 and COR 5773.
|
|
161111 2496416 viewsBinduli, Kalgoorlie Freighter train 5025, waggon AQRY 1001 platform B with two 20' 22G1 type boxes, a Triton TRHU 188479[6] and CAI CAIU 339509[8]. The AQRY are a bar-coupled pair and were used for rail transport as the AFRF type on the Darwin line and are originally former ANR-CR waggons.
|
|
161112 3015416 viewsWest Kalgoorlie, loaded Malcolm sulphur train 6029, CQZY type waggon CQZY 1655, built by CIMC at Dalian China for CFCLA and one of fifteen on lease to Aurizon with a pair of un-decaled hard-top 25U0 type containers BISU 100025 and BISU 100068.
|
|
161112 3465416 viewsBinduli, loaded Hampton acid train 7406 with AQHY 30055 with sulphuric acid tank CSA 0090, originally built by the WAGR Midland Workshops in 1964/66 as a WF type flat waggon, then in 1997, following several recodes and modifications, was one of seventy five waggons converted to the WQH type to carry CSA sulphuric acid tanks between Hampton/Kalgoorlie and Perth/Kwinana. CSA 0090 was built by VCare Engineering, India for Access Petrotec & Mining Solutions.
|
|
040806 092042416 viewsGoldsworthy Junction, 5666 runs the weighbridge test train with the four orange weighbridge test waggons and two ore waggons to provide braking.
|
|
0020 Comeng NSW 040815 171350416 viewsNelson Point, detail view of data placard of fuel tank waggon 0020, 82 kilolitre capacity built by Comeng NSW for BP as RTC 2, used by Mt Newman Mining, unsure when converted to 0020.
|
|
0527 Magor USA 050412 0750416 viewsQuarry 8, Shaw Siding area. Side view of 1963 built Magor USA waggon 527, originally in ore service before conversion to a ballast waggon.
|
|
0534 Magor USA 050412 0755416 viewsQuarry 8, Shaw Siding area. 3/4 view of 1963 built Magor USA waggon 534, originally in ore service before conversion to a ballast waggon.
|
|
CHRY 759 050518 2107416 viewsFlash Butt yard, CFCLA hire ballast waggon CHRY type CHRY 759.
|
|
CHRY 746 050518 2123416 viewsFlash Butt yard, CFCLA hire ballast waggon CHRY type CHRY 746, shows bogie detail, Barber S-2 type bogie, with CFCLA id of CQFE 097.
|
|
0512 Magor USA 050518 2177416 viewsBing Siding. Side view of 1963 built Magor USA waggon 512, one of twenty waggons originally used on the Oroville Dam construction before coming to the Pilbara in January 1968 as ballast waggons.
|
|
6015 Comeng WA 050801 4771416 viewsFlash Butt yard, rail recovery and transport train flat waggon #26, 6015, built by Comeng WA in November 1971.
|
|
0665 Mt Newman Mining Workshops 051001 5740416 viewsBoodarie, the Steel Train or rail recovery and transport train, cut down by Mt Newman Mining workshops, a Magor USA built former Oroville Dam 91 ton ore waggon 665, seen here being used as the crib waggon on the end of the steel train.
|
|
6012 Scotts of Ipswich Qld 050525 2952416 viewsMooka Siding, rail recovery and transport train flat waggon #18, 6012, built by Scotts of Ipswich Qld in September 1970, view of number board and rail support structure.
|
|
6010 Scotts of Ipswich Qld 050525 2989416 viewsMooka Siding, rail recovery and transport train flat waggon #21, 6007 with registered number G506007, built by Scotts of Ipswich Qld in 1970.
|
|
060429 3738416 viewsFlash Butt yard, Pony re-laying waggon, #1, originally built for Goldsworthy Mining as one of a batch of six with a 55 tonne rating by Tomlinson Steel in 1966.
|
|
0594 BHP OCRS 060713 6548416 viewsBoodarie Yard, modified original Magor USA built Oroville waggon 594, cut down and covered and in use as indexing waggons on the front of each rake for Finucane Island car dumpers, note the original ODCX marking visible.
|
|
050421 1314416 viewsShaw Siding, BHP's Switch Tamper SW 02 is a Plasser Australia model Unimat S4 switch tamper runs along the mainline track. 21st April 2005.
|
|
050625 3660416 viewsMooka North, BHP's new Tamper 3 track machine a Plasser Australia 09-3X model serial M480 in out on the passing track. 25th June 2005.
|
|
| 19216 files on 961 page(s) |
 |
|
|
|
|
|
|
|
555 | |
|
|
|
|
|
|
|
Login
