|
|
210-00280 viewsWeipa, Lorim Point, Comalco rail dump station for unloading the bauxite trains from Andoom mine looking towards Andoom from the workshops end.
|
|
210-01230 viewsWeipa, Lorim Point, Comalco rail dump station, view of the hydraulic jacking or indexing arms located on the workshops or empty car side of the unloader, used to position the train for unloading.
|
|
210-02248 viewsWeipa, Lorim Point, Comalco rail dump station, view looking towards Andoom Mine, shows inspection walkway and opening for unloading hopper, the waggons are discharged on the right track.
|
|
210-03234 viewsWeipa, Lorim Point, Comalco rail dump station, view of the hydraulic jacking or indexing arms located on the Andoom side of the unloader, used to position the train for unloading.
|
|
210-04258 viewsWeipa, Lorim Point, Comalco rail dump station, view looking towards the workshops, shows inspection walkway and opening for unloading hopper, control cabin, the waggons are discharged on the left track behind the OPEN PIT sign.
|
|
210-05232 viewsWeipa, Lorim Point, rake of loaded cars with a compressor car on the rear of the consist closest to camera.
|
|
210-06259 viewsWeipa, Lorim Point, cab side view of loco number and builders plate for Clyde Engineering EMD model GT26C serial 72-752 for Comalco numbered R 1001, originally numbered at 1.001.
|
|
210-07246 viewsWeipa, Lorim Point railway workshops, front view of Comalco R 1001 loco Clyde Engineering EMD model GT26C serial 72-752 while is sits at the fuel point, items of note are the second 'tropical roof' and the five chime horn cut into the nose. Also as the Weipa locomotives don't work in MU there is only the train brake hose and the main res hose for charging the belly dump discharge doors.
|
|
210-08239 viewsWeipa, Lorim Point railway workshops, driver side view of Comalco R 1001 loco Clyde Engineering EMD model GT26C serial 72-752 while is sits at the fuel point, items of note are the second 'tropical roof' and the five chime horn cut into the nose. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like the WAGR L or VR C classes which are also GT26C models.
|
|
210-09272 viewsWeipa, Lorim Point railway workshops, observer side view of Comalco R 1001 loco Clyde Engineering EMD model GT26C serial 72-752 while is sits at the fuel point, items of note are these units were setup to have the long hood leading, the CCTV camera looking down the long hood, the second 'tropical roof' and the five chime horn cut into the nose. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like you see on the WAGR L or VR C classes which are also GT26C models.
|
|
210-10281 viewsWeipa, Lorim Point railway workshops. Comalco shunt engine R 1003 coupled to a Difco side dump waggon. R 1003 is an Electro Motive built NW2 model with serial number 4114 and frame number of E761-8 was built in November 1946 at La Grange originally for Canadian National with road number 7943. Sold to Comalco in December 1975 and entered service in 1976. This unit was subsequently scrapped in 2000.
|
|
210-11259 viewsWeipa, Lorim Point railway workshops, back view of Comalco R 1001 loco Clyde Engineering EMD model GT26C serial 72-752 while is sits at the fuel point, items of note are the five chime horn cut into the hood and as the Weipa locomotives don't work in MU there is only the train brake hose and the main res hose for charging the belly dump discharge doors.
|
|
210-12263 viewsWeipa, Lorim Point railway workshops, Comeng Qld 1976 build HMAS type bottom discharge ore car 3089, this was the second last car of that order.
|
|
210-13277 viewsWeipa, Lorim Point railway workshops, Comalco ore waggon 3089, 1 of 29 HMAS type built by Comeng Qld in 1974-76, behind it is car 3036 from the original order of 61 HMAS waggons also build by Comeng Qld in 1971-72, and now fitted with hungry boards.
|
|
210-14335 viewsWeipa, Lorim Point railway workshops track maintenance compound, Speno rail grinder model RR 28E, a twenty eight wheel grinder, this unit is very likely to have been originally used by Mt Newman Mining in the Pilbara in the 1970s. Even a 20 km remote railway requires a grinder! September 1995.
|
|
210-15516 viewsWeipa, Lorim Point track maintenance compound, the only ballast waggon in the rollingstock fleet is R 4003. Comeng Qld supplied a ballast waggon in 1971 (ordered in Feb 1971, delivered in Sept 1971), you can see the Comeng plate on the left hand end of the waggon frame, but this waggon does looks more like an American import.
|
|
210-16297 viewsWeipa, Lorim Point track maintenance compound, Aresco ballast regulator, rear view.
|
|
210-17261 viewsWeipa, Lorim Point track maintenance compound, sleeper handler crane and a sleeper scarifier - inserter beside it numbered R 4015, ballast waggon R 4003 in the background.
|
|
210-18268 viewsWeipa, Lorim Point railway workshops, observer's side of Comalco R 1001 loco Clyde Engineering EMD model GT26C serial 72-752 while is sits at the fuel point, items of note are the second 'tropical roof', CCTV looking down the driver's 'off side' and the five chime horn cut into the hood. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like the WAGR L or VR C classes which are also GT26C models and the fire extinguisher cut in below the radiator.
|
|
210-19228 viewsWeipa, Lorim Point, railway workshops, front view of Comalco R 1001 loco Clyde Engineering EMD model GT26C serial 72-752 while is sits at the fuel point, items of note are the second 'tropical roof' and the five chime horn cut into the nose. Also as the Weipa locomotives don't work in MU there is only the train brake hose and the main res hose for charging the belly dump discharge doors.
|
|
|
|
Login
