 Last additions - Interstate negative and digital Albums |
213-31576 viewsWeipa, Lorim Point railway workshops track maintenance compound, Speno rail grinder model RR 28E, a twenty eight wheel grinder, this unit very likely was originally purchased by Mt Newman Mining and used in the Pilbara in the 1970s. Even a 30 km remote railway requires a grinder! September 1995.Oct 26, 2014
|
|
213-29388 viewsWeipa, view of tri-mount bogie on Comalco R 1004, Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, note the difference this and the V/Line N class bogie used in passenger service.Oct 26, 2014
|
|
213-28307 viewsWeipa, view of pilot on Comalco R 1004, Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, note the difference this in freight only traffic to an V/Line N class pilot used in passenger service.Oct 26, 2014
|
|
213-27563 viewsWeipa, builders plate on Comalco R 1004. Purchased from BHP Iron Ore in 1994. Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power /.Oct 26, 2014
|
|
213-26397 viewsWeipa, Lorim Point railway workshops. Comalco shunt engine R 1003 coupled to a Difco side dump waggon. R 1003 is an Electro Motive built NW2 model with serial number 4114 and frame number of E761-8 was built in November 1946 at La Grange originally for Canadian National with road number 7943. Sold to Comalco in December 1975 and entered service in 1976. This unit was subsequently scrapped in 2000.Oct 26, 2014
|
|
213-25308 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-24270 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-23273 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-22336 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-21333 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-20730 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-19444 viewsWeipa, Lorim Point fuel point, Comalco R 1004 loco Clyde Engineering built EMD model JT42C built 1990 serial 90-1277, weight 132 tonne, engine 12-710G3A, generator AR11-WBA-CA5, traction motors D87ETR, rated power 2460 kW/3300 hp. The body is similar to a V/Line N class while the components are the same as the Australian National AN class. Originally built for Goldsworthy Mining as GML 10 for use at their Western Australian iron ore railway and locally known as Cinderella. Purchased by Comalco in 1994 following the takeover of Goldsworthy by BHP.Oct 26, 2014
|
|
213-17359 viewsWeipa, Lorim Point workshops, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like you see on the GT26C models of WAGR L or VR C classes.Oct 26, 2014
|
|
213-18318 viewsWeipa, Lorim Point workshops, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. Also noticeable, the units don't have dynamic brakes fitted so there is no brake 'blister' in the middle of the hood like you see on the GT26C models of WAGR L or VR C classes.Oct 26, 2014
|
|
213-15384 viewsWeipa, Lorim Point workshops building, looking south east at the rear of the building. Canron Rail Group Mk I switch tamper. Canron was taken over by Harsco in 1990-91.Oct 26, 2014
|
|
213-16341 viewsWeipa, Lorim Point workshops building, looking south east at the rear of the building and yard. From the left, R 1003, waggons, R 1001 and the Canron Rail Group Mk I switch tamper.Oct 26, 2014
|
|
213-13326 viewsWeipa, Lorim Point workshops looking east, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. This unit is almost identical to the GT26C models of the WAGR L class. September 1995.Oct 26, 2014
|
|
213-14304 viewsWeipa, Lorim Point workshops looking east, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. This unit is almost identical to the GT26C models of the WAGR L class. September 1995.Oct 26, 2014
|
|
213-11382 viewsWeipa, Lorim Point workshops yard, ground throw point or switch operating unit with the number 5 identification.Oct 26, 2014
|
|
213-12333 viewsWeipa, Lorim Point workshops, Comalco R 1001 loco Clyde Engineering built EMD model GT26C serial 72-752 sits at the fuel point, items of note are these units were setup to have the long hood leading, the second 'tropical roof' and the five chime horn cut into the nose. This unit is almost identical to the GT26C models of the WAGR L class. September 1995.Oct 26, 2014
|
|
| 2316 files on 116 page(s) |
 |
|
|
|
|
|
|
|
98 | |
|
|
|
|
|
|
|
Login
