 Most viewed - BHP_Rolling_Stock_-_Ore |
110620 2479r61 viewsWalla, loaded BHP ore waggon 4169 is a Goninan WA build from an order of one hundred and twenty-six waggons in 1997 with a tapered floor and rounded wall bottoms using 3CR12 stainless steel in an effort to eliminate internal painting and reducing wear on the waggon body, these were designated HC7081. 20th of June 2011.
|
|
030712 14255761 viewsNelson Point, empty BHP ore waggon 553, one of the original Magor USA build waggons bought out at construction of the Mt Newman project. Visible is the ODCX code and number 82190 from the Oroville Dam Construction company days in the USA. The DZ 11-95 code was the late time it was internally painted to reduce wear and the SL 76 with 90 below it was the last time the Miner SL-76 draft gear was replaced. The orange smiley sticker indicates that this is an original 'Oroville Dam' ore waggon and non relayed AB braked. 12th of July 2003.
|
|
110620 2337r59 viewsWalla, loaded BHP ore waggon 4209 is a Goninan WA build from an order of one hundred and twenty-six waggons in 1997 with a tapered floor and rounded wall bottoms using 3CR12 stainless steel in an effort to eliminate internal painting and reducing wear on the waggon body, these were designated HC7081. 20th of June 2011.
|
|
110620 2356r56 viewsWalla, loaded BHP ore waggon 9065, renumbered from original Comeng WA build waggon 2701 which was originally built in 1971 as part of a batch of four hundred waggons. The renumbering would be due to a new waggon replacing a potential scrap waggon, which then has been returned to service. 20th of June 2011.
|
|
110620 2456r55 viewsWalla, loaded BHP ore waggon 2683, originally built in 1971 by Comeng WA as part of a batch of four hundred waggons. The walls in the ribs have been resheeted. Still has the original white end for rotary coupler, original number and weight. 20th of June 2011.
|
|
030712 14305155 viewsNelson Point, empty BHP ore waggon 9023, originally built by Comeng in Mittagong NSW as a part of seven prototype ore waggons made from low carbon 301 stainless steel with an higher volume and aerodynamic flat sides and were bogieless with four independent radial wheel sets. Of the seven waggon, the first four had a flat floor and final three had a drop belly floor. The radial wheel sets were later replaced with conventional bogies. 12th of July 2003.
|
|
110620 2040r54 viewsWalla Siding, empty BHP ore waggon 2899, originally built in 1971 by Comeng WA as part of a batch of four hundred waggons. The steel panels in the ribs have been resheeted, but not the end panels. 20th of June 2011.
|
|
110620 2396r54 viewsWalla, loaded BHP ore waggon 4001, an example built May 2005 of the Golynx design as built by Goninan WA in large numbers This Golynx body replaced an earlier Comeng waggon with the same number. 20th of June 2011.
|
|
| 88 files on 5 page(s) |
 |
|
5 |
|
Login
